Handlebars Chubby Ape 14 Inch Black for Harley Davidson with 1-1/4 risers

Made in The Netherlands

Westland Customs Special: The Chubby Ape. 38mm (1-1/2 inch) thick! Handmade, custom made for your Harley-Davidson.
Due to the unique eccentric arrangement of the handles, all brake and clutch cylinders of all construction years will fit.

Note: Only suitable for motorcycles with 1-1/4 inch risers
All holes are pre-drilled, wiring can go straight through! All 1 inch controls fit on it.

This handlebar is made of high-quality tubular steel, with a material thickness of at least 2 mm.
These models are TIG welded by hand.
All our handlebars are produced entirely in our own factory in the Netherlands and meet the highest quality standards.

Measurements in millimeters:
A= width, B= height, C= end height D= pullback, E= clamp width F= bottom width G= length grips

A= 900
B= 355
C= 350
D= 120
E= 135
F= 300
G= 200

The handlebar has slotted holes to hide your wiring and is adapted for an electronic throttle (Harley-Davidson).

Please note that it may be required to extend your wiring, cables and/or pipes! Check this to be sure, especially in the case of an ape hanger.

Material:
High-quality cold strip steel (Certified EN 10305-3 CR1 E195 S5)
Tubes of 38x2mm, 32x3, 25.4x2mm
Black powder coating

Pay attention; Westland Customs does not accept any liability with regard to the sharp parts on or on this handlebar! Assembly and use is at all times at your own risk!

For shipments to the UK: all import taxes and costs are included in the price.